School of Chemical and Petroleum Engineering, Sharif University of Technology, Tehran, IRAN
POLYMER COMPSOITE RESEARCH GROUP
School of Chemical and Petroleum Engineering, Sharif University of Technology
School of Chemical and Petroleum Engineering, Sharif University of Technology
2019-2021
• P. Rahmani, A. Shojaei. A review on the features, performance and potential applications of hydrogel-based wearable strain/pressure sensors. Advances in Colloid and Interface Science. 298, 102553, (2021).
• R. Mohammadkhani , A. Shojaei, P. Rahmani, N Pirhady Tavandashti, M. Amouzegar. Synthesis and characterization of polyaniline/nanodiamond hybrid nanostructures with various morphologies to enhance the corrosion protection performance of epoxy coating. Diamond and Related Materials. 120, 108672, (2021).
• S. Salkhi Khasraghi, A. Shojaei, M. Janmaleki, U. Sundararaj. Efficient inductively heated shape memory polyurethane acrylate network with silane modified nanodiamond@ Fe3O4 superparamagnetic nanohybrid. European Polymer Journal. 159, 110735, (2021).
• S. Salkhi Khasraghi, A. Shojaei, U. Sundararaj, “Highly biocompatible multifunctional hybrid nanoparticles based on Fe3O4 decorated nanodiamond with superior superparamagnetic behaviors and photoluminescent properties”, Materials Science and Engineering: C, Vol. 114, 110993 (2020).
• E. Jafarpour, A. Shojaei, F. Ahmadijokani, “High-performance styrene-butadiene rubber nanocomposites based on carbon nanotube/nanodiamond hybrid with synergistic thermal conduction characteristics and electrically insulating properties”, Polymer, Vol. 196, 122470 (2020).
• S. Aranifard, A. Shojaei, “Chitosan interphase around nanodiamond: Insight from equilibrium molecular dynamics”, Diamond and Related Materials, Vol. 104, 107737 (2020).
• F. Ahmadijokani, A. Shojaei, S. Dordanihaghighi, E. Jafarpour, S. Mohammadi, M. Arjmand, “Effects of hybrid carbon-aramid fiber on performance of non-asbestos organic brake friction composites”, Wear, Vol. 452-453, 203280 (2020).
• H. Molavi, M. Neshastehgar, A. Shojaei, H. Ghashghaeinejad, “Ultrafast and simultaneous removal of anionic and cationic dyes by nanodiamond/UiO-66 hybrid nanocomposite”, Chemosphere, Vol. 247, 125882 (2020).
• M. Neshastehgar, P. Rahmani, A. Shojaei, H. Molavi, “Enhanced Adsorption Removal Performance of UiO-66 by Rational Hybridization with Nanodiamond”, Microporous & Mesoporous Materials, Vol. 296, 110008 (2020).
• P. Rahmani, A. Shojaei, N. Pirhady Tavandashti, “Nanodiamond loaded with corrosion inhibitor as efficient nanocarrier to improve anticorrosion behavior of epoxy coating” Journal of Industrial and Engineering Chemistry, Vol. 83, 153-163 (2020).
• H. Molavi, A. Shojaei, S. A. Mousavi, S. A. Ahmadi, “Effect of reactive diluent on gas separation behavior of photo-curable acrylated polyurethane composite membranes” Journal of Applied Polymer Science, DOI: 10/1002/APP/48293 (2019).
• S. Salkhi Khasraghi, A. Shojaei, U. Sundararaj, “Bio-based UV curable polyurethane acrylate: morphology and shape memory behaviors”, European Polymer Journal, Vol. 118, 514-527 (2019).
• H. Molavi, A. Pourghaderi, A. Shojaei, “Experimental study on the influence of initial pH, ionic strength, and temperature on the selective adsorption of dyes onto nanodiamonds”, Journal of Chemical & Engineering Data, Vol. 64, 1508-1514 (2019).
• P. Karami, S. Salkhi Khasraghi, M. Hashemi, S. Rabiei, A. Shojaei, “Polymer/nanodiamond composites - a comprehensive review from synthesis and fabrication to properties and applications”, Advances in Colloid and Interface Science, Vol. 269, 122-151 (2019).
• H. Molavi, A. Shojaei, “Mixed-Matrix Composite Membranes Based on UiO-66-derived MOFs for CO2 Separation”, ACS Applied Materials & Interfaces, Vol. 11, 9448-9461 (2019).
• F. Ahmadijokani, Y. Alaei, A. Shojaei, M. Arjmand, N. Yan, “Frictional Behavior of Resin-based Brake Composites: Effect of Carbon Fibre Reinforcement”, Wear, Vol. 420-421, 108-115 (2019).
• F. Ahmadijokani, A. Shojaei, M. Arjmand, Y. Alaei, N. Yan, “Effect of short carbon fiber on thermal, mechanical and tribological behavior of phenolic-based brake friction materials”, Composites- Part B, Vol. 168, 98-105 (2019).
• M. Zamani, M. Aghajanzadeh, H. Molavi, H. Danafar, A. Shojaei, “Thermally Oxidized Nanodiamond: an effective sorbent for Separation of Methotrexate from Aqueous Media: Synthesis, Characterization, In Vivo and In Vitro Biocompatibility Study”, Journal of Inorganic and Organometallic Polymers and Materials, Vol. 29(3), 701-709 (2019).
• R. Mohammadkhani , A. Shojaei, P. Rahmani, N Pirhady Tavandashti, M. Amouzegar. Synthesis and characterization of polyaniline/nanodiamond hybrid nanostructures with various morphologies to enhance the corrosion protection performance of epoxy coating. Diamond and Related Materials. 120, 108672, (2021).
• S. Salkhi Khasraghi, A. Shojaei, M. Janmaleki, U. Sundararaj. Efficient inductively heated shape memory polyurethane acrylate network with silane modified nanodiamond@ Fe3O4 superparamagnetic nanohybrid. European Polymer Journal. 159, 110735, (2021).
• S. Salkhi Khasraghi, A. Shojaei, U. Sundararaj, “Highly biocompatible multifunctional hybrid nanoparticles based on Fe3O4 decorated nanodiamond with superior superparamagnetic behaviors and photoluminescent properties”, Materials Science and Engineering: C, Vol. 114, 110993 (2020).
• E. Jafarpour, A. Shojaei, F. Ahmadijokani, “High-performance styrene-butadiene rubber nanocomposites based on carbon nanotube/nanodiamond hybrid with synergistic thermal conduction characteristics and electrically insulating properties”, Polymer, Vol. 196, 122470 (2020).
• S. Aranifard, A. Shojaei, “Chitosan interphase around nanodiamond: Insight from equilibrium molecular dynamics”, Diamond and Related Materials, Vol. 104, 107737 (2020).
• F. Ahmadijokani, A. Shojaei, S. Dordanihaghighi, E. Jafarpour, S. Mohammadi, M. Arjmand, “Effects of hybrid carbon-aramid fiber on performance of non-asbestos organic brake friction composites”, Wear, Vol. 452-453, 203280 (2020).
• H. Molavi, M. Neshastehgar, A. Shojaei, H. Ghashghaeinejad, “Ultrafast and simultaneous removal of anionic and cationic dyes by nanodiamond/UiO-66 hybrid nanocomposite”, Chemosphere, Vol. 247, 125882 (2020).
• M. Neshastehgar, P. Rahmani, A. Shojaei, H. Molavi, “Enhanced Adsorption Removal Performance of UiO-66 by Rational Hybridization with Nanodiamond”, Microporous & Mesoporous Materials, Vol. 296, 110008 (2020).
• P. Rahmani, A. Shojaei, N. Pirhady Tavandashti, “Nanodiamond loaded with corrosion inhibitor as efficient nanocarrier to improve anticorrosion behavior of epoxy coating” Journal of Industrial and Engineering Chemistry, Vol. 83, 153-163 (2020).
• H. Molavi, A. Shojaei, S. A. Mousavi, S. A. Ahmadi, “Effect of reactive diluent on gas separation behavior of photo-curable acrylated polyurethane composite membranes” Journal of Applied Polymer Science, DOI: 10/1002/APP/48293 (2019).
• S. Salkhi Khasraghi, A. Shojaei, U. Sundararaj, “Bio-based UV curable polyurethane acrylate: morphology and shape memory behaviors”, European Polymer Journal, Vol. 118, 514-527 (2019).
• H. Molavi, A. Pourghaderi, A. Shojaei, “Experimental study on the influence of initial pH, ionic strength, and temperature on the selective adsorption of dyes onto nanodiamonds”, Journal of Chemical & Engineering Data, Vol. 64, 1508-1514 (2019).
• P. Karami, S. Salkhi Khasraghi, M. Hashemi, S. Rabiei, A. Shojaei, “Polymer/nanodiamond composites - a comprehensive review from synthesis and fabrication to properties and applications”, Advances in Colloid and Interface Science, Vol. 269, 122-151 (2019).
• H. Molavi, A. Shojaei, “Mixed-Matrix Composite Membranes Based on UiO-66-derived MOFs for CO2 Separation”, ACS Applied Materials & Interfaces, Vol. 11, 9448-9461 (2019).
• F. Ahmadijokani, Y. Alaei, A. Shojaei, M. Arjmand, N. Yan, “Frictional Behavior of Resin-based Brake Composites: Effect of Carbon Fibre Reinforcement”, Wear, Vol. 420-421, 108-115 (2019).
• F. Ahmadijokani, A. Shojaei, M. Arjmand, Y. Alaei, N. Yan, “Effect of short carbon fiber on thermal, mechanical and tribological behavior of phenolic-based brake friction materials”, Composites- Part B, Vol. 168, 98-105 (2019).
• M. Zamani, M. Aghajanzadeh, H. Molavi, H. Danafar, A. Shojaei, “Thermally Oxidized Nanodiamond: an effective sorbent for Separation of Methotrexate from Aqueous Media: Synthesis, Characterization, In Vivo and In Vitro Biocompatibility Study”, Journal of Inorganic and Organometallic Polymers and Materials, Vol. 29(3), 701-709 (2019).
2016-2018
• H. Molavi, A. Shojaei, S. A. Mousavi, “Photo-curable acrylate polyurethane as efficient composite membrane for CO2 separation, Polymer, Vol. 149, 178-191 (2018).
• S. Aranifard, A. Shojaei, “Bare and functionalized nanodiamonds in aqueous media: A theoretical study”, Diamond and Related Materials, Vol. 89, 301-311 (2018).
• M. Raeiszadeh, A. Hakimian, A. Shojaei, H. Molavi, “Nanodiamond-filled chitosan as an efficient adsorbent for anionic dye removal from aqueous solutions”, Journal of Environmental Chemical Engineering, Vol. 6, 3283-3294 (2018).
• H. Molavi, F. Ahmadi Joukani, A. Shojaei, “Ethylenediamine grafting to functionalized NH2-UiO-66 using green aza-Michael addition reaction to improve CO2/CH4 adsorption selectivity”, Industrial & Engineering Chemistry Research, Vol. 6(2), 3283-3294 (2018).
• H. Molavi, A. Hakimian, A. Shojaei, M. Raeiszadeh, “Selective dye adsorption by highly water stable metal-organic framework: Long term stability analysis in aqueous media”, Applied Surface Science, Vol. 445, 424-436 (2018).
• H. Molavi, A. Shojaei, A. Pourghaderi, Rapid and tunable selective adsorption of dyes using thermally oxidized nanodiamond”, Journal of Colloid and Interface Science, Vol. 524, 52-64 (2018).
• H. Molavi, A. Shojaei, S. A. Mousavi, “Improving mixed-matrix membrane performance via PMMA grafting from functionalized NH2-UiO-66, Journal of Materials Chemistry A, Vol. 6, 2775-2791 (2018).
• H. Molavi, M. Zamani, M. Aghajanzadeh, H. K. Manjili, H. Danafar, A. Shojaei, Evaluation of UiO-66 metal organic framework as an effective sorbent for Curcumin’s overdose, Applied Organometallic Chemistry, Vol. 32(4), e4221 (2018).
• M. Aghajanzadeh, M. Zamani, H. Molavi, Khieri Manjili H, Danafar H, Shojaei A, Preparation of metal-organic frameworks UiO-66 for adsorptive removal of methotrexate from aqueous solution, Journal of Inorganic and Organometallic Polymers and Materials, Vol. 28, 177-186 (2018).
• M. Alishiri, A. Shojaei, “In-situ preparation and characterization of biocompatible acrylate-terminated polyurethane containing chemically modified multi-walled carbon nanotube”, Polymer Composites, Vol. 39(S1), E297-307 (2018).
• F. Hajiali, S. Tajbakhsh, A. Shojaei, “Fabrication and properties of polycaprolactone composites containing calcium phosphate-based ceramics and bioactive glasses in bone tissue engineering: a review”, Polymer Reviews, Vol. 58, 164-207 (2018).
• H. Molvai, A. Eskandari, A. Shojaei, S. A. Mousavi, Enhancing CO2/N2 adsorption selectivity via post-synthetic modification of NH2-UiO-66(Zr), Microporous & Mesoporous Materials, Vol. 257, 193-201 (2017).
• P. Karami, A. Shojaei, “Improvement of dry sliding tribological properties of polyamide 6 using diamond nanoparticles”, Tribology International, Vol. 115, 370-377 (2017).
• E. Shabani, S. A. Mousavi, A. Shojaei, “A flat polymeric membrane sensor for carbon dioxide/nitrpgen gas mixture, Chemical Engineering Communications, Vol. 204(4), 445-452 (2017).
• M. Karimi, A. Nematollahzadeh, A. Shojaei, “Amino functionalized hierarchically produced porous polyacrylamide microspheres for the removal of chromium (VI) from aqueous solution”, Journal of Porous Materials, Vol. 24, 1705-1715 (2017).
• N. Pirhady Tavandashti, M. Ghorbani, A. Shojaei, J.M.C. Mol, H. Terryn, Y. Gonzalez-Garcia ,“pH-responsive nanostructured polyaniline capsules for self-healing corrosion protection: the influence of capsule concentration”, Scientia Iranica F, Vol. 24, 3512-3520 (2017).
• Z. Delavar, A. Shojaei, “Enhanced mechanical properties of chitosan/nanodiamond composites by improving interphase using thermal oxidation of nanodiamond”, Carbohydrate Polymers, Vol. 167, 219-228 (2017).
• F. Hajiali, A. Shojaei, “Network structure and mechanical properties of polydimethylsiloxane filled with nanodiamond - Effect of degree of silanization of nanodiamond”, Composites Science and Technology, Vol. 142, 227-234 (2017).
• M.J. Hashemi, A. Shojaei,” Morphology development and mechanical properties of unsaturated polyester resin containing nanodiamond”, Polymer International, Vol. 66, 950-959 (2017).
• P. Karami, A. Shojaei, “Morphological and mechanical properties of polyamide 6/nanodiamond composites prepared by melt mixing-effect of surface functionality of nanodiamond”, Polymer International, Vol. 66, 557-565 (2017).
• N. Pirhady Tavandashti, M. Ghorbani, A. Shojaei, J.M.C. Mol H. Terryn K. Baert Y. Gonzalez-Garcia, “Inhibitor-loaded conducting polymer capsules for active corrosion protection of coating defects”, Corrosion Science, Vol. 112, 138-149 (2016).
• F. Hajiali, A. Shojaei, “Silane functionalization of nanodiamond for polymer nanocomposites- effect of degree of silanization”, Colloids and Surfaces A- Physicochemical and Engineering Aspects, Vol. 506, 254-263 (2016).
• S. Rabiei, A. Shojaei, “Vulcanization kinetics and reversion behavior of natural rubber/styrene-butadiene rubber blend filled with nanodiamond- the role of sulfur curing system”, European Polymer Journal, Vol. 81, 98-113 (2016).
• N. Pirhady Tavandashti, M. Ghorbani, A. Shojaei, Y. Gonzalez-Garcia, H. Terryn, J.M.C. Mol, “pH responsive Ce(III) loaded polyaniline nanofibers for self-healing corrosion protection of AA2024-T3”, Progress in Organic Coating, Vol. 99, 197-209 (2016).
• M. Alishiri, A. Shojaei, M.J. Abdekhodaie, “Biodegradable polyurethane acrylate/HEMA-grafted nanodiamond composites with bone regenerative potential applications: structure, mechanical properties and biocompatibility”, RSC Advances, Vol. 6, 8743-8755 (2016).
• S. Aranifard, A. Shojaei, “Bare and functionalized nanodiamonds in aqueous media: A theoretical study”, Diamond and Related Materials, Vol. 89, 301-311 (2018).
• M. Raeiszadeh, A. Hakimian, A. Shojaei, H. Molavi, “Nanodiamond-filled chitosan as an efficient adsorbent for anionic dye removal from aqueous solutions”, Journal of Environmental Chemical Engineering, Vol. 6, 3283-3294 (2018).
• H. Molavi, F. Ahmadi Joukani, A. Shojaei, “Ethylenediamine grafting to functionalized NH2-UiO-66 using green aza-Michael addition reaction to improve CO2/CH4 adsorption selectivity”, Industrial & Engineering Chemistry Research, Vol. 6(2), 3283-3294 (2018).
• H. Molavi, A. Hakimian, A. Shojaei, M. Raeiszadeh, “Selective dye adsorption by highly water stable metal-organic framework: Long term stability analysis in aqueous media”, Applied Surface Science, Vol. 445, 424-436 (2018).
• H. Molavi, A. Shojaei, A. Pourghaderi, Rapid and tunable selective adsorption of dyes using thermally oxidized nanodiamond”, Journal of Colloid and Interface Science, Vol. 524, 52-64 (2018).
• H. Molavi, A. Shojaei, S. A. Mousavi, “Improving mixed-matrix membrane performance via PMMA grafting from functionalized NH2-UiO-66, Journal of Materials Chemistry A, Vol. 6, 2775-2791 (2018).
• H. Molavi, M. Zamani, M. Aghajanzadeh, H. K. Manjili, H. Danafar, A. Shojaei, Evaluation of UiO-66 metal organic framework as an effective sorbent for Curcumin’s overdose, Applied Organometallic Chemistry, Vol. 32(4), e4221 (2018).
• M. Aghajanzadeh, M. Zamani, H. Molavi, Khieri Manjili H, Danafar H, Shojaei A, Preparation of metal-organic frameworks UiO-66 for adsorptive removal of methotrexate from aqueous solution, Journal of Inorganic and Organometallic Polymers and Materials, Vol. 28, 177-186 (2018).
• M. Alishiri, A. Shojaei, “In-situ preparation and characterization of biocompatible acrylate-terminated polyurethane containing chemically modified multi-walled carbon nanotube”, Polymer Composites, Vol. 39(S1), E297-307 (2018).
• F. Hajiali, S. Tajbakhsh, A. Shojaei, “Fabrication and properties of polycaprolactone composites containing calcium phosphate-based ceramics and bioactive glasses in bone tissue engineering: a review”, Polymer Reviews, Vol. 58, 164-207 (2018).
• H. Molvai, A. Eskandari, A. Shojaei, S. A. Mousavi, Enhancing CO2/N2 adsorption selectivity via post-synthetic modification of NH2-UiO-66(Zr), Microporous & Mesoporous Materials, Vol. 257, 193-201 (2017).
• P. Karami, A. Shojaei, “Improvement of dry sliding tribological properties of polyamide 6 using diamond nanoparticles”, Tribology International, Vol. 115, 370-377 (2017).
• E. Shabani, S. A. Mousavi, A. Shojaei, “A flat polymeric membrane sensor for carbon dioxide/nitrpgen gas mixture, Chemical Engineering Communications, Vol. 204(4), 445-452 (2017).
• M. Karimi, A. Nematollahzadeh, A. Shojaei, “Amino functionalized hierarchically produced porous polyacrylamide microspheres for the removal of chromium (VI) from aqueous solution”, Journal of Porous Materials, Vol. 24, 1705-1715 (2017).
• N. Pirhady Tavandashti, M. Ghorbani, A. Shojaei, J.M.C. Mol, H. Terryn, Y. Gonzalez-Garcia ,“pH-responsive nanostructured polyaniline capsules for self-healing corrosion protection: the influence of capsule concentration”, Scientia Iranica F, Vol. 24, 3512-3520 (2017).
• Z. Delavar, A. Shojaei, “Enhanced mechanical properties of chitosan/nanodiamond composites by improving interphase using thermal oxidation of nanodiamond”, Carbohydrate Polymers, Vol. 167, 219-228 (2017).
• F. Hajiali, A. Shojaei, “Network structure and mechanical properties of polydimethylsiloxane filled with nanodiamond - Effect of degree of silanization of nanodiamond”, Composites Science and Technology, Vol. 142, 227-234 (2017).
• M.J. Hashemi, A. Shojaei,” Morphology development and mechanical properties of unsaturated polyester resin containing nanodiamond”, Polymer International, Vol. 66, 950-959 (2017).
• P. Karami, A. Shojaei, “Morphological and mechanical properties of polyamide 6/nanodiamond composites prepared by melt mixing-effect of surface functionality of nanodiamond”, Polymer International, Vol. 66, 557-565 (2017).
• N. Pirhady Tavandashti, M. Ghorbani, A. Shojaei, J.M.C. Mol H. Terryn K. Baert Y. Gonzalez-Garcia, “Inhibitor-loaded conducting polymer capsules for active corrosion protection of coating defects”, Corrosion Science, Vol. 112, 138-149 (2016).
• F. Hajiali, A. Shojaei, “Silane functionalization of nanodiamond for polymer nanocomposites- effect of degree of silanization”, Colloids and Surfaces A- Physicochemical and Engineering Aspects, Vol. 506, 254-263 (2016).
• S. Rabiei, A. Shojaei, “Vulcanization kinetics and reversion behavior of natural rubber/styrene-butadiene rubber blend filled with nanodiamond- the role of sulfur curing system”, European Polymer Journal, Vol. 81, 98-113 (2016).
• N. Pirhady Tavandashti, M. Ghorbani, A. Shojaei, Y. Gonzalez-Garcia, H. Terryn, J.M.C. Mol, “pH responsive Ce(III) loaded polyaniline nanofibers for self-healing corrosion protection of AA2024-T3”, Progress in Organic Coating, Vol. 99, 197-209 (2016).
• M. Alishiri, A. Shojaei, M.J. Abdekhodaie, “Biodegradable polyurethane acrylate/HEMA-grafted nanodiamond composites with bone regenerative potential applications: structure, mechanical properties and biocompatibility”, RSC Advances, Vol. 6, 8743-8755 (2016).
2013-2015
• P. Jahanmard, A. Shojaei, “Mechanical properties and structure of solvent processed novolac resin/layered silicate: development of interphase region”, RSC Advances, Vol. 5, 80875-80883 (2015).
• A. Aris, A. Shojaei, R. Bagheri, “Cure kinetics of nanodiamond filled epoxy resin: Influence of nanodiamind surface functionality”, Industrial & Engineering Chemistry Research, Vol. 54, 8954-89 (2015).
• M. Ahmadi, A. Shojaei, Reinforcing mechanisms of carbon nanotube and high structure carbon black in natural rubber/styrene-butadiene rubber blend prepared by mechanical mixing- Effect of bound rubber, Polymer International, Vol. 64,1627-1638 (2015).
• M. Faghihi, A. Shojaei, R. Bagheri, Characterization of polyamide 6/carbon nanotube composites prepared by melt mixing- effect of matrix molecular weight and structure, Composites Part B, Vol. 78, 50-64, (2015).
• A. Khazaei, A. Shojaei, Modeling and optimization of friction materials based on genetic programming and experimental frictional data, Journal of Reinforced Plastics and Composites, Vol. 34, 581-590 (2015).
• A. Nematollahzadeh, A. Shojaei, M. Karimi, Chemically modified organic/inorganic nanoporous composites particles for adsorption of reactive black 5 from aqueous solution, Reactive and Functional Polymers, Vol. 86, 7-15 (2015).
• N.A. Burns, M.A. Naclerio, S. A. Khan, A. Shojaei, R.R. Raghavan, Nanodiamond gels in nonpolar media: Colloidal and rheological properties, Journal of Rheology Vol. 58, 1599-1610 (2014).
• M. Alishiri, A. Shojaei, M.J. Abdekhodaie, H. Yeganeh, “Synthesis and characterization of biodegradable acrylated polyurethane based on poly(e-caprolactone) and 1,6-hexamethylene diisocyanate, Materials Science and Engineering C, Vol. 42, 763-773 (2014).
• N. Pirhady, Ghorbani, A. Shojaei, The Morphology Transition Control of polyaniline from nanotubes to nanospheres in a soft template method, Polymer International, Accepted (2014).
• M. Eesaee, A. Shojaei, Effect of nanoclays on the mechanical properties and durability of novolac phenolic resin/woven glass fiber composite at various chemical environments, Composites Part A, Vol. 63, 149-158 (2014).
• Kh. Khederlou, R. Bagheri, A. Shojaei, A mathematical method for XRD pattern interpretation in clay containing nanocomposites, Applied Surface Science, Vol. 318, 90-94 (2014).
• H. Etemadi, A. Shojaei, Characterization of Reinforcing Effect of Alumina Nanoparticles on the Novolac Phenolic Resin, Polymer Composites, Vol.35(7), 1285-1293 (2014).
• H. Etemadi, A. Shojaei, P. Jahanmard, Effect of alumina nanoparticle on the tribological performance of automotive brake friction materials, Journal of Reinforced Plastics and Composites, Vol. 33 (2), 166-178 (2014).
• S. Sadeghnejad, M. Masihi, M. Pishvaie, A. Shojaei, P.R. King, “Estimating the Connected Volume of Hydrocarbon During Early Reservoir Life by Percolation Theory”, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Vol. 36 (3), 301-308 (2014).
• N. Pirhady, Ghorbani, A. Shojaei, Controlled growth of hollow polyaniline structure: from nanotubes to microspheres polymers, Polymer, Vol. 54 (21), 5586-5594, (2013).
• M. Ahmadi, A. Shojaei, Cure kinetic and network structure of NR/SBR composites reinforced by MWCNT and carbon blacks, Thermochimica Acta, Vol. 566, 238-248 (2013).
• A. Shojaei, P. Nourbakhsh, M Faghihi, An investigation on the structural characteristics and reinforcement of melt processed PA66/MWCNT composites, Polymers for Advanced Technology, Vol. 21 (5), 356-364 (2013).
• A. Nematollahzadeh, A. Shojaei, M.J. Abdekhodaie, B. Sellergren, Molecularly imprinted polydopamine nano-layer on the pore surface of porous particles for protein capture in HPLC column, Journal of Colloid and Interface Science, Vol. 404 , 117-126 (2013).
• A. Aris, A. Shojaei, R. Bagheri, “Cure kinetics of nanodiamond filled epoxy resin: Influence of nanodiamind surface functionality”, Industrial & Engineering Chemistry Research, Vol. 54, 8954-89 (2015).
• M. Ahmadi, A. Shojaei, Reinforcing mechanisms of carbon nanotube and high structure carbon black in natural rubber/styrene-butadiene rubber blend prepared by mechanical mixing- Effect of bound rubber, Polymer International, Vol. 64,1627-1638 (2015).
• M. Faghihi, A. Shojaei, R. Bagheri, Characterization of polyamide 6/carbon nanotube composites prepared by melt mixing- effect of matrix molecular weight and structure, Composites Part B, Vol. 78, 50-64, (2015).
• A. Khazaei, A. Shojaei, Modeling and optimization of friction materials based on genetic programming and experimental frictional data, Journal of Reinforced Plastics and Composites, Vol. 34, 581-590 (2015).
• A. Nematollahzadeh, A. Shojaei, M. Karimi, Chemically modified organic/inorganic nanoporous composites particles for adsorption of reactive black 5 from aqueous solution, Reactive and Functional Polymers, Vol. 86, 7-15 (2015).
• N.A. Burns, M.A. Naclerio, S. A. Khan, A. Shojaei, R.R. Raghavan, Nanodiamond gels in nonpolar media: Colloidal and rheological properties, Journal of Rheology Vol. 58, 1599-1610 (2014).
• M. Alishiri, A. Shojaei, M.J. Abdekhodaie, H. Yeganeh, “Synthesis and characterization of biodegradable acrylated polyurethane based on poly(e-caprolactone) and 1,6-hexamethylene diisocyanate, Materials Science and Engineering C, Vol. 42, 763-773 (2014).
• N. Pirhady, Ghorbani, A. Shojaei, The Morphology Transition Control of polyaniline from nanotubes to nanospheres in a soft template method, Polymer International, Accepted (2014).
• M. Eesaee, A. Shojaei, Effect of nanoclays on the mechanical properties and durability of novolac phenolic resin/woven glass fiber composite at various chemical environments, Composites Part A, Vol. 63, 149-158 (2014).
• Kh. Khederlou, R. Bagheri, A. Shojaei, A mathematical method for XRD pattern interpretation in clay containing nanocomposites, Applied Surface Science, Vol. 318, 90-94 (2014).
• H. Etemadi, A. Shojaei, Characterization of Reinforcing Effect of Alumina Nanoparticles on the Novolac Phenolic Resin, Polymer Composites, Vol.35(7), 1285-1293 (2014).
• H. Etemadi, A. Shojaei, P. Jahanmard, Effect of alumina nanoparticle on the tribological performance of automotive brake friction materials, Journal of Reinforced Plastics and Composites, Vol. 33 (2), 166-178 (2014).
• S. Sadeghnejad, M. Masihi, M. Pishvaie, A. Shojaei, P.R. King, “Estimating the Connected Volume of Hydrocarbon During Early Reservoir Life by Percolation Theory”, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Vol. 36 (3), 301-308 (2014).
• N. Pirhady, Ghorbani, A. Shojaei, Controlled growth of hollow polyaniline structure: from nanotubes to microspheres polymers, Polymer, Vol. 54 (21), 5586-5594, (2013).
• M. Ahmadi, A. Shojaei, Cure kinetic and network structure of NR/SBR composites reinforced by MWCNT and carbon blacks, Thermochimica Acta, Vol. 566, 238-248 (2013).
• A. Shojaei, P. Nourbakhsh, M Faghihi, An investigation on the structural characteristics and reinforcement of melt processed PA66/MWCNT composites, Polymers for Advanced Technology, Vol. 21 (5), 356-364 (2013).
• A. Nematollahzadeh, A. Shojaei, M.J. Abdekhodaie, B. Sellergren, Molecularly imprinted polydopamine nano-layer on the pore surface of porous particles for protein capture in HPLC column, Journal of Colloid and Interface Science, Vol. 404 , 117-126 (2013).
2010-2012
• M. Karimi, A. Shojaei, A. Nematollahzadeh, M.J. Abdekhodaie, “Column study of Cr (VI) adsorption onto modified silica-polyacrylamide microspheres composite”, Chemical Engineering Journal, Vol. 210,280-288 (2012).
• R. Arefinia, A. Shojaei, H. Shariatpanahi, J. Neshati, “Anticorrosion properties of smart coating based on polyaniline nanoparticles/epoxy-ester system”, Progress in Organic Coatings, Vol. 75, 502-508, (2012).
• P. Egbal Jahromei, A. Shojaei, S. M.R. Pishvaie, “Prediction and optimization of cure cycle of thick fiber-reinforced composite parts using dynamic artificial neural networks, Journal of Reinforced Plastics and Composites, Vol. 31, Issue 18, 1201-1215 (2012).
• M.M. Saatchi, A. Shojaei, “Effect of carbon based nanoparticles on the cure characteristics and network structure of styrene-butadiene-rubber vulcanizate”, Polymer International, Vol. 61, Issue 4, 664-672, (2012).
• A. Saffar, A. Shojaei,” Effect of rubber component on the performance of brake friction materials” Wear, Vol. 274-275, 286-297 (2012).
• A. Nematollahzadeh, M. J. Abdekhodaie, A. Shojaei, “Submicron polyacryamide beads with tunable size for verapamil imprinting” Journal of Applied Polymer Science, Vol. 125, Issue 1, 189-199 (2012).
• S. Sadeghnejad, M. Masihi, A. Shojaei, M. Pishvaie, P. R. King, “Field scale characterization of geological formations using percolation theory” Transport in Porous Media, Vol. 86, No. 2, (2011).
• S. Sadeghnejad, M. Masihi, M. Pishvaie, A. Shojaei, P. R. King, “Utilization of percolation approach to evaluate reservoir connectivity and effective permeability: a case study on North Pars gas field”, Scientia Iranica, Vol. 18, Issue 6, 1391-1396 (2011).
• S. Sadeghnejad, M. Masihi, P. R. King, A. Shojaei, M. Pishvaie, “A reservoir conductivity evaluation using percolation theory”, Petroleum Science and Technology, Vol. 29(10), 1041-1053 (2011).
• H. Pakravesh, A. Shojaei, “Optimization of industrial CSTR for vinyl acetate polymerization using novel shuffled frog leaping based hybrid algorithms and dynamic modeling”, Computers and Chemical Engineering” Vol. 35, 2351-2365 (2011).
• M.M. Saatchi, A. Shojaei, “Mechanical performance of styrene-butadiene-rubber filled with carbon nanoparticles prepared by mechanical mixing”, Materials Science and Engineering A- Structural Materials: Properties, Microstructure and Processing, Vol. 528:7161-7171 (2011).
• A. Shojaei, S. Gholamalipour, “Effect of chemical treatment of Teflon powder on the properties of polyamide 66/Teflon composites prepared by melt mixing”, Macromolecular Research, Vol. 19 (6): 613-621 (2011).
• S. Razavi, A. Shojaei, R. Bagheri, Binary and ternary blends of high-density polyethylene with poly(ethylene terephthalate) and polystyrene based on recycled materials", Polymers for Advanced Technologies, Vol. 22:690-702 (2011).
• A. Nematollahzadeh, W. Sun, C. Aureliano, J. Stute, M.J. Abdekhodaie, A. Shojaei, B. Sellergren, “High capacity hierarchically imprinted polymer beads for protein recognition and capture”, Angewandte Chemie, Vol. 50:495-498 (2011).
• A. Shojaei, M. Arjmand, A. Saffar, “Studies on the friction and wear characteristics of rubber-based friction materials containing carbon and cellulose fibers”, Journal of Materials Science, Vol. 46:1890-1901 (2011).
• M. Arjmand, A. Shojaei, “Tribological characteristics of rubber-based friction materials”, Tribology Letters, Vol. 41:325-336 (2011).
• M. Bandarian, A. Shojaei, A. M. Rashidi, “Thermal, mechanical and acoustic damping properties of flexible open-cell polyurethane/multi-walled carbon nanotube foam: effect of surface functionality of nanotube”, Polymer International, Vol. 60 (3):475-482 (2011).
• A. Shojaei, A. Behradfar, N. Sheikh, “Effect of organoclay loading and electron beam irradiation on the physico-mechanical properties of low density polyethylene/ethylene-vinyl acetate blend”, Polymers for Advanced Technologies, Vol. 22(12):2352-2359 (2011).
• S. Sadeghnejad, M. Masihi, P. R. King, A. Shojaei, M. Pishvaei, “Effect of anisotropy on the scalling of connectivity and conductivity in continuum percolation theory, Physical Review E, Vol. 81, 061119 (1-5), (2010).
• A. Behradfar, A. Shojaei, N. Sheikh, “Rheological and mechanical characteristic of low density polyethyelen/ethylene-vinyl acetate/organoclay nanocomposites”, Polymer Engineering & Science, Vol. 50 (7), 1315-1325, (2010).
• A. Saffar, A. Shojaei, M. Arjmand, “Theoretical and experimental analysis of the thermal, fade and wear characteristics of rubber-based composite friction materials’, Wear, Vol. 269,, 145-151, (2010).
• A. Shojaei, M. Faghihi, "Physico-mechanical properties and thermal stability of thermoset nanocomposites based on styrene-butadiene rubber/phenolic resin blend ", Materials Science and Engineering A- Structural Materials: Properties, Microstructure and Processing, Vol. 527(4-5), 917-926, (2010).
• A. Shojaei, M. Faghihi, "Analysis of Structure-Properties Relationship in Nitrile-Butadiene Rubber/Phenolic Resin/Organoclay Ternary Nanocomposites Using Simple Model System" Polymers for Advanced Technologies, Vol. 21, 356-364, (2010).
• R. Arefinia, A. Shojaei, H. Shariatpanahi, J. Neshati, “Anticorrosion properties of smart coating based on polyaniline nanoparticles/epoxy-ester system”, Progress in Organic Coatings, Vol. 75, 502-508, (2012).
• P. Egbal Jahromei, A. Shojaei, S. M.R. Pishvaie, “Prediction and optimization of cure cycle of thick fiber-reinforced composite parts using dynamic artificial neural networks, Journal of Reinforced Plastics and Composites, Vol. 31, Issue 18, 1201-1215 (2012).
• M.M. Saatchi, A. Shojaei, “Effect of carbon based nanoparticles on the cure characteristics and network structure of styrene-butadiene-rubber vulcanizate”, Polymer International, Vol. 61, Issue 4, 664-672, (2012).
• A. Saffar, A. Shojaei,” Effect of rubber component on the performance of brake friction materials” Wear, Vol. 274-275, 286-297 (2012).
• A. Nematollahzadeh, M. J. Abdekhodaie, A. Shojaei, “Submicron polyacryamide beads with tunable size for verapamil imprinting” Journal of Applied Polymer Science, Vol. 125, Issue 1, 189-199 (2012).
• S. Sadeghnejad, M. Masihi, A. Shojaei, M. Pishvaie, P. R. King, “Field scale characterization of geological formations using percolation theory” Transport in Porous Media, Vol. 86, No. 2, (2011).
• S. Sadeghnejad, M. Masihi, M. Pishvaie, A. Shojaei, P. R. King, “Utilization of percolation approach to evaluate reservoir connectivity and effective permeability: a case study on North Pars gas field”, Scientia Iranica, Vol. 18, Issue 6, 1391-1396 (2011).
• S. Sadeghnejad, M. Masihi, P. R. King, A. Shojaei, M. Pishvaie, “A reservoir conductivity evaluation using percolation theory”, Petroleum Science and Technology, Vol. 29(10), 1041-1053 (2011).
• H. Pakravesh, A. Shojaei, “Optimization of industrial CSTR for vinyl acetate polymerization using novel shuffled frog leaping based hybrid algorithms and dynamic modeling”, Computers and Chemical Engineering” Vol. 35, 2351-2365 (2011).
• M.M. Saatchi, A. Shojaei, “Mechanical performance of styrene-butadiene-rubber filled with carbon nanoparticles prepared by mechanical mixing”, Materials Science and Engineering A- Structural Materials: Properties, Microstructure and Processing, Vol. 528:7161-7171 (2011).
• A. Shojaei, S. Gholamalipour, “Effect of chemical treatment of Teflon powder on the properties of polyamide 66/Teflon composites prepared by melt mixing”, Macromolecular Research, Vol. 19 (6): 613-621 (2011).
• S. Razavi, A. Shojaei, R. Bagheri, Binary and ternary blends of high-density polyethylene with poly(ethylene terephthalate) and polystyrene based on recycled materials", Polymers for Advanced Technologies, Vol. 22:690-702 (2011).
• A. Nematollahzadeh, W. Sun, C. Aureliano, J. Stute, M.J. Abdekhodaie, A. Shojaei, B. Sellergren, “High capacity hierarchically imprinted polymer beads for protein recognition and capture”, Angewandte Chemie, Vol. 50:495-498 (2011).
• A. Shojaei, M. Arjmand, A. Saffar, “Studies on the friction and wear characteristics of rubber-based friction materials containing carbon and cellulose fibers”, Journal of Materials Science, Vol. 46:1890-1901 (2011).
• M. Arjmand, A. Shojaei, “Tribological characteristics of rubber-based friction materials”, Tribology Letters, Vol. 41:325-336 (2011).
• M. Bandarian, A. Shojaei, A. M. Rashidi, “Thermal, mechanical and acoustic damping properties of flexible open-cell polyurethane/multi-walled carbon nanotube foam: effect of surface functionality of nanotube”, Polymer International, Vol. 60 (3):475-482 (2011).
• A. Shojaei, A. Behradfar, N. Sheikh, “Effect of organoclay loading and electron beam irradiation on the physico-mechanical properties of low density polyethylene/ethylene-vinyl acetate blend”, Polymers for Advanced Technologies, Vol. 22(12):2352-2359 (2011).
• S. Sadeghnejad, M. Masihi, P. R. King, A. Shojaei, M. Pishvaei, “Effect of anisotropy on the scalling of connectivity and conductivity in continuum percolation theory, Physical Review E, Vol. 81, 061119 (1-5), (2010).
• A. Behradfar, A. Shojaei, N. Sheikh, “Rheological and mechanical characteristic of low density polyethyelen/ethylene-vinyl acetate/organoclay nanocomposites”, Polymer Engineering & Science, Vol. 50 (7), 1315-1325, (2010).
• A. Saffar, A. Shojaei, M. Arjmand, “Theoretical and experimental analysis of the thermal, fade and wear characteristics of rubber-based composite friction materials’, Wear, Vol. 269,, 145-151, (2010).
• A. Shojaei, M. Faghihi, "Physico-mechanical properties and thermal stability of thermoset nanocomposites based on styrene-butadiene rubber/phenolic resin blend ", Materials Science and Engineering A- Structural Materials: Properties, Microstructure and Processing, Vol. 527(4-5), 917-926, (2010).
• A. Shojaei, M. Faghihi, "Analysis of Structure-Properties Relationship in Nitrile-Butadiene Rubber/Phenolic Resin/Organoclay Ternary Nanocomposites Using Simple Model System" Polymers for Advanced Technologies, Vol. 21, 356-364, (2010).
2007-2009
• A. Shojaei, H. Farrahinia, S. M. R. Pishvaie. “Effect of system of initiators on the process cycle of nonisothermal resin transfer molding- numerical investigation”, Composites- Part A Manufacturing, Vol. 41 (1), 138-145, (2009).
• M. Faghihi, A. Shojaei, "Properties of alumina nanoparticle-filled nitrile butadiene rubber/phenolic resin blend prepared by melt mixing", Polymer Composites, Vol. 30 (9) 1290-1298, (2009).
• A. Shojaei, M Fereydoon, "Taguchi analysis of extrusion variables and composition effects on the morphology and mechanical properties of EPR-g-MA toughened polyamide 6 and its composite with short glass fiber", Materials Science and Engineering A- Structural Materials: Properties, Microstructure and Processing, Vol. 506 (1-2), 45-57, (2009).
• B. Derakhshandeh, A. Shojaei, M. Faghihi, "Effects of rubber curing ingredients and phenolic-resin on mechanical, thermal and morphological characteristics of rubber/phenolic-resin blends, Journal of Applied Polymer Science, Vol. 108 (6), 3808-3821, (2008).
• A. Shojaei, M. Fahimian, B, Derakhshandeh, “Thermally conductive rubber-based composite friction materials for railroad brakes- thermal conduction characteristics”, Composites Science and Technology, Vol. 67 (13), 2665-2674, (2007).
• A. Shojaei, R. Fathi, N. Sheikh, “Adhesion modification of polyethylenes for metallization using radiation-induced grafting of vinyl monomers”, Surface and Coatings Technology, Vol. 201 (16-17), 7519-7529, (2007).
• A. Shojaei, H. Yousefian, S. Saharkhiz, “Performance characterization of composite materials based on recycled high density polyethylene and ground tire rubber reinforced with short glass fiber for structural application”. Journal of Applied Polymer Science, Vol. 104 (1), pages 1-8, (2007).
• M. Faghihi, A. Shojaei, "Properties of alumina nanoparticle-filled nitrile butadiene rubber/phenolic resin blend prepared by melt mixing", Polymer Composites, Vol. 30 (9) 1290-1298, (2009).
• A. Shojaei, M Fereydoon, "Taguchi analysis of extrusion variables and composition effects on the morphology and mechanical properties of EPR-g-MA toughened polyamide 6 and its composite with short glass fiber", Materials Science and Engineering A- Structural Materials: Properties, Microstructure and Processing, Vol. 506 (1-2), 45-57, (2009).
• B. Derakhshandeh, A. Shojaei, M. Faghihi, "Effects of rubber curing ingredients and phenolic-resin on mechanical, thermal and morphological characteristics of rubber/phenolic-resin blends, Journal of Applied Polymer Science, Vol. 108 (6), 3808-3821, (2008).
• A. Shojaei, M. Fahimian, B, Derakhshandeh, “Thermally conductive rubber-based composite friction materials for railroad brakes- thermal conduction characteristics”, Composites Science and Technology, Vol. 67 (13), 2665-2674, (2007).
• A. Shojaei, R. Fathi, N. Sheikh, “Adhesion modification of polyethylenes for metallization using radiation-induced grafting of vinyl monomers”, Surface and Coatings Technology, Vol. 201 (16-17), 7519-7529, (2007).
• A. Shojaei, H. Yousefian, S. Saharkhiz, “Performance characterization of composite materials based on recycled high density polyethylene and ground tire rubber reinforced with short glass fiber for structural application”. Journal of Applied Polymer Science, Vol. 104 (1), pages 1-8, (2007).
2004-2006
• A. Shojaei, R. Arefinia, “Analysis of the sedimentation process in reactive polymeric suspensions”, Chemical Engineering Science, Vol. 61 (23), 7565-7578, (2006).
• A. Shojaei, “A numerical investigation on the cure cycle of railroad composite brake blocks”, International Polymer Processing, Vol. 21 (4), 421-431, (2006).
• R. Arefinia, A. Shojaei, “On the viscosity of composite suspensions of aluminum and ammonium perchlorate particles dispersed in hydroxyl terminated polybutadiene-new empirical model”, Journal of Colloid and Interface Science, Vol. 299 (2), 962-971, (2006).
• A. Shojaei, “A numerical study of filling process through multilayer preforms in resin injection/compression molding”, Composites Science and Technology, Vol. 66 (11-12), 1546-1557, (2006).
• A. Shojaei, F Abbasi, “Cure kinetics of a polymer-based composite friction material” Journal of Applied Polymer Science, Vol. 100 (1), 9-17, (2006).
• A. Shojaei, “Numerical simulation of three-dimensional flow and analysis of filling process in compression resin transfer moulding”, Composites Part A, Vol. 37 (9), 1434-1450, (2006).
• E. Haddadi, F. Abbasi, A. Shojaei, “Wear and thermal effects in low modulus polymer-based composite friction materials”, Journal of Applied Polymer Science, Vol. 95 (5), 1181-1189, (2005).
• A. Shojaei, F. Trochu, S. R. Ghaffarian, S. M. H. Karimian and L. Lessard, “An experimental study of saturated and unsaturated permeabilities in resin transfer molding based on unidirectional flow measurements”, Journal of Reinforced Plastics and Composites, vol. 23 (14), 1515-1536, (2004).
• A. Shojaei, S. R. Ghaffarian, and S. M. H. Karimian, “Three-dimensional process cycle simulation of composite parts manufactured by resin transfer molding”, Composite Structures, vol. 65 (3-4), 381-390, (2004).
• A. Shojaei, “A numerical investigation on the cure cycle of railroad composite brake blocks”, International Polymer Processing, Vol. 21 (4), 421-431, (2006).
• R. Arefinia, A. Shojaei, “On the viscosity of composite suspensions of aluminum and ammonium perchlorate particles dispersed in hydroxyl terminated polybutadiene-new empirical model”, Journal of Colloid and Interface Science, Vol. 299 (2), 962-971, (2006).
• A. Shojaei, “A numerical study of filling process through multilayer preforms in resin injection/compression molding”, Composites Science and Technology, Vol. 66 (11-12), 1546-1557, (2006).
• A. Shojaei, F Abbasi, “Cure kinetics of a polymer-based composite friction material” Journal of Applied Polymer Science, Vol. 100 (1), 9-17, (2006).
• A. Shojaei, “Numerical simulation of three-dimensional flow and analysis of filling process in compression resin transfer moulding”, Composites Part A, Vol. 37 (9), 1434-1450, (2006).
• E. Haddadi, F. Abbasi, A. Shojaei, “Wear and thermal effects in low modulus polymer-based composite friction materials”, Journal of Applied Polymer Science, Vol. 95 (5), 1181-1189, (2005).
• A. Shojaei, F. Trochu, S. R. Ghaffarian, S. M. H. Karimian and L. Lessard, “An experimental study of saturated and unsaturated permeabilities in resin transfer molding based on unidirectional flow measurements”, Journal of Reinforced Plastics and Composites, vol. 23 (14), 1515-1536, (2004).
• A. Shojaei, S. R. Ghaffarian, and S. M. H. Karimian, “Three-dimensional process cycle simulation of composite parts manufactured by resin transfer molding”, Composite Structures, vol. 65 (3-4), 381-390, (2004).
2000-2003
•
Shojaei, S. R. Ghaffarian and S. M. H. Karimian, “Simulation of the three-dimensional non-isothermal mold filling process in resin transfer molding”, Composites Science and Technology, vol. 63, 1931-1948, (2003).
• A. Shojaei, A. S. R. Ghaffarian and S. M. H. Karimian, “Numerical analysis of controlled injection strategies in resin transfer molding”, Journal of Composite Materials, vol. 37, 1011-1035, (2003).
• A. Shojaei, S. R. Ghaffarian, and S. M. H. Karimian, “Modeling and simulation approaches in the resin transfer molding process- a review”, Polymer Composites, vol. 24, 525-544, (2003).
• A. Shojaei, S. R. Ghaffarian and S. M. H. Karimian, “Numerical simulation of three-dimensional mold filling in resin transfer molding”, Journal of Reinforced Plastics and Composites, vol. 22, 1497-1529, (2003).
• A. Shojaei, S. R. Ghaffarian and S. M. H. Karimian, “Numerical simulation of three-dimensional mold filling process in resin transfer molding using quasi-steady state and partial saturation formulations”, Composites Science and Technology, Vol. 62, 861-879, (2002).
• F. Abbasi, A. Shojaei, A. A. Katbab, “Thermal interaction between polymer-based composite friction materials and counterfaces”, Journal of Applied Polymer Science, Vol. 81, 364-369, (2001).
• A. Shojaei, F. Khoylou and F. Afshar Taromi, “Synthesis and properties of g (Co-60) cured acrylated urethane coating”, Iranian Polymer Journal, Vol. 9, No. 1, 59-66, (2000).
• A. Shojaei, A. S. R. Ghaffarian and S. M. H. Karimian, “Numerical analysis of controlled injection strategies in resin transfer molding”, Journal of Composite Materials, vol. 37, 1011-1035, (2003).
• A. Shojaei, S. R. Ghaffarian, and S. M. H. Karimian, “Modeling and simulation approaches in the resin transfer molding process- a review”, Polymer Composites, vol. 24, 525-544, (2003).
• A. Shojaei, S. R. Ghaffarian and S. M. H. Karimian, “Numerical simulation of three-dimensional mold filling in resin transfer molding”, Journal of Reinforced Plastics and Composites, vol. 22, 1497-1529, (2003).
• A. Shojaei, S. R. Ghaffarian and S. M. H. Karimian, “Numerical simulation of three-dimensional mold filling process in resin transfer molding using quasi-steady state and partial saturation formulations”, Composites Science and Technology, Vol. 62, 861-879, (2002).
• F. Abbasi, A. Shojaei, A. A. Katbab, “Thermal interaction between polymer-based composite friction materials and counterfaces”, Journal of Applied Polymer Science, Vol. 81, 364-369, (2001).
• A. Shojaei, F. Khoylou and F. Afshar Taromi, “Synthesis and properties of g (Co-60) cured acrylated urethane coating”, Iranian Polymer Journal, Vol. 9, No. 1, 59-66, (2000).
Selected Presentations in International Conferences
• P. Rahmani, A. Shojaei, Stretchable and electrical conductive acrylic acid hydrogel as a strain sensor, 14th International Seminar on Polymer Science and Technology (ISPST 2020), 9-12 November 2020, Tehran, Iran.
• S. Salkhi Khasraghi, A. Shojaei, U.T. Sundararaj, Nanodiamond-superpramagnetic hybrid nanoparticles for magnetoactive shape memory polyurethane network, 35th International Conference of The Polymer Processing Society, 26-30 May 2019, Izmir, Turkey.
• S. Salkhi Khasraghi, A. Shojaei, U.T. Sundararaj, UV curable biodegradable polyurethane acrylate with shape memory effect, the 68th Canadian Chemical Engineering Conference (CSChE 68), 28-31 2018, October, Toronto, Canada.
• M. Raeiszadeh, A. Hakimain, A. Shojaei, H. Molavi, Dye removal application of chitosan/nanodiamond biosorbent, 7th International Conference on Nanostructures (ICNS7), 27Feb- 1 Mar 2018, Tehran, Iran.
• H. Molavi, A. Hakimian, A. Shojaei, Highly stable metal-organic framework for selective dye adsorption, 7th International Conference on Nanostructures (ICNS7), 27Feb- 1 Mar 2018, Tehran, Iran.
• A. Hakimian, H. Molavi, M. Raeiszadeh, A. Shojaei, Adsorptive removal of methyl orange from aqueous solution with a highly stable metal-organic framework (MOF), 6th International Biennial Conference on UltraFine Grained and Nanostructured Materials (UFGNSM-2017), November 12-13, 2017, Kish Island, Iran.
• P. Karami, A. Shojaei, Effect of type of diamine modifiers of nanodiamond on tribologial properties of polyamide 6 composites, 21st International Conference on Composite Materials (ICCM21), 20-25 August 2017, Xi’an, China.
• S. Rabiei, A. Shojaei, Effect of nano diamonds on cure characteristics and network structure of NR/SBR vulcanizates, 4th International Conference on Composites: Characterization, Fabrication and Applications (CCFA-4), December 16-17, 2014, Tehran, Iran.
• N.A. Burns, S.R. Raghavan, A. Shojaei, S.A. Khan, Nanodiamond gels: colloidal and rheological properties, Society of Rheology 86th Annual Meeting, October 5-9, 2014, Philadelphia, Pennsylvania, USA.
• N. Pirhady Tavandashti, M. Ghorbani, A. Shojaei, A soft template route to control the morphology transition of polyanilline from nanotube to nanosphere, 5th International Conference on Nanostructures (ICNS5), 6-9 March 2014, Kish Island, Iran.
• A. Aris, A. Shojaei, R. Bagheri, Analysis of cure kinetic of nanodiamond-Epoxy nanocomposite, 5th International Conference on Nanostructures (ICNS5), 6-9 March 2014, Kish Island, Iran.
• Kh. Khederlou, A. Darestani Farahani, R. Bagheri, A. Shojaei, Clay dispersion analysis in nanocomposites using XRD mathematical interpretation, 5th International Conference on Nanostructures (ICNS5), 6-9 March 2014, Kish Island, Iran.
• M. Faghihi, A. Shojaei, R. Bagheri, Investigation of mechanical, morphological and thermal properties of PA6/MWCNT nanocomposites prepared by melt mixing, 5th International Conference on Nanostructures (ICNS5), 6-9 March 2014, Kish Island, Iran.
• M. Ahmadi, A. Shojaei, Correlation between stress-softening behavior and mechanical performance of NR/SBR composites reinforced with carbon blacks and MWNT, 15th European Conference on Composite Materials (ECCM-15), 24-28 June 2012, Venice, Italy.
• P. Jahanmard, A. Shojaei, M. Faghihi, Experimental and theoretical study on the mechanical properties of novolac phenolic resin nanocomposites: effects of nanoclay and multiwalled carbon nanotube, 15th European Conference on Composite Materials (ECCM-15), 24-28 June 2012, Venice, Italy.
• P. Jahanmard, A. Shojaei, Correlation of morphology and mechanical properties of novolac phenolic resin/clay nanocomposites prepared via solution mixing method, Polymer Processing Society (PPS2011)/Asia-Australia Regional Meeting, November 15-17, 2011, Kish Island, Iran.
• M. Karimi, A. Nematollahzadeh, A. Shojaei, M. J. Abdekhodaie, Synthesis of polymeric beads with tunable size and porosity and their application in removal of Cr(VI), Polymer Processing Society (PPS2011)/Asia-Australia Regional Meeting, November 15-17, 2011, Kish Island, Iran.
• M. Ahmadi, A. Shojaei, Investigation of thermal transition and mechanical properties of NR/SBR composites filled with carbon blacks and MWCNT, Polymer Processing Society (PPS2011)/Asia-Australia Regional Meeting, November 15-17, 2011, Kish Island, Iran.
• M. Hadizadeh, A. Shojaei, R. Bagheri, Rhelogical and morphological properties of nanocomposites based on PA66/PA6/MWCNT prepared by melt mixing, 18th International Conference on Composite Materials (ICCM-18) August 21-26, 2011, Jeju island, South Korea.
• M. M. Saatchi, A. Shojaei, Micromechanical modeling to analyze the reinforcing efficiency of carbon nanotube and high structure carbon black on the mechanical properties of styrene-butadiene-rubber, The 2nd International Conference on Composites: Characterization Fabrication and Application (CCFA-2) Dec. 27-30, 2010, Kish Island, Iran.
• M. Bandarian, A. Shojaei, A.M. Rashidi, The effect of functionality of multi wall carbon nanotube on the thermal properties of polyurethane, 14th European Conference on Composite Materials (ECCM-14), 7-10 June 2010, Budapest University of Technology and Economics, Budapest, Hungary. Book of Abstract, Page 34.
• P. Eghbal, A. Shojaei, S. M. R. Pishvaie, Rapid 3-dimensional simulation of curing in thick parts of fiber reinforced composites using dynamic artificial neural networks, 9th International Seminar on Polymer Science and Technology(ISPST-2009), 17-21 October 2009, Tehran, Iran.
• A. Behradfar, A. Shojaei, N. Sheikh, Correlation of morphological and rheological characteristics of low density polyethylene/ethylene-vinyl acetate/organoclay ternary nanocomposites, 9th International Seminar on Polymer Science and Technology(ISPST-2009), 17-21 October 2009, Tehran, Iran
• S. Gholamalipour, A. Shojaei, Effect of chemical modification of PTFE particles on the physical and mechanical properties of PA66/PTFE composites, ETDCM9- 9th Seminar on Experimental Techniques and Design in Composite Materials, PP 67-68, 30 September-2 October 2009 –DTG University of Padova–Vicenza, Italy.
• M. Faghihi, A. Shojaei, Effect of copper nanoparticle on the properties of styrene butadiene rubber, ETDCM9- 9th Seminar on Experimental Techniques and Design in Composite Materials,PP 133-134, 30 September-2 October 2009 –DTG University of Padova–Vicenza, Italy.
• S. Salkhi Khasraghi, A. Shojaei, U.T. Sundararaj, Nanodiamond-superpramagnetic hybrid nanoparticles for magnetoactive shape memory polyurethane network, 35th International Conference of The Polymer Processing Society, 26-30 May 2019, Izmir, Turkey.
• S. Salkhi Khasraghi, A. Shojaei, U.T. Sundararaj, UV curable biodegradable polyurethane acrylate with shape memory effect, the 68th Canadian Chemical Engineering Conference (CSChE 68), 28-31 2018, October, Toronto, Canada.
• M. Raeiszadeh, A. Hakimain, A. Shojaei, H. Molavi, Dye removal application of chitosan/nanodiamond biosorbent, 7th International Conference on Nanostructures (ICNS7), 27Feb- 1 Mar 2018, Tehran, Iran.
• H. Molavi, A. Hakimian, A. Shojaei, Highly stable metal-organic framework for selective dye adsorption, 7th International Conference on Nanostructures (ICNS7), 27Feb- 1 Mar 2018, Tehran, Iran.
• A. Hakimian, H. Molavi, M. Raeiszadeh, A. Shojaei, Adsorptive removal of methyl orange from aqueous solution with a highly stable metal-organic framework (MOF), 6th International Biennial Conference on UltraFine Grained and Nanostructured Materials (UFGNSM-2017), November 12-13, 2017, Kish Island, Iran.
• P. Karami, A. Shojaei, Effect of type of diamine modifiers of nanodiamond on tribologial properties of polyamide 6 composites, 21st International Conference on Composite Materials (ICCM21), 20-25 August 2017, Xi’an, China.
• S. Rabiei, A. Shojaei, Effect of nano diamonds on cure characteristics and network structure of NR/SBR vulcanizates, 4th International Conference on Composites: Characterization, Fabrication and Applications (CCFA-4), December 16-17, 2014, Tehran, Iran.
• N.A. Burns, S.R. Raghavan, A. Shojaei, S.A. Khan, Nanodiamond gels: colloidal and rheological properties, Society of Rheology 86th Annual Meeting, October 5-9, 2014, Philadelphia, Pennsylvania, USA.
• N. Pirhady Tavandashti, M. Ghorbani, A. Shojaei, A soft template route to control the morphology transition of polyanilline from nanotube to nanosphere, 5th International Conference on Nanostructures (ICNS5), 6-9 March 2014, Kish Island, Iran.
• A. Aris, A. Shojaei, R. Bagheri, Analysis of cure kinetic of nanodiamond-Epoxy nanocomposite, 5th International Conference on Nanostructures (ICNS5), 6-9 March 2014, Kish Island, Iran.
• Kh. Khederlou, A. Darestani Farahani, R. Bagheri, A. Shojaei, Clay dispersion analysis in nanocomposites using XRD mathematical interpretation, 5th International Conference on Nanostructures (ICNS5), 6-9 March 2014, Kish Island, Iran.
• M. Faghihi, A. Shojaei, R. Bagheri, Investigation of mechanical, morphological and thermal properties of PA6/MWCNT nanocomposites prepared by melt mixing, 5th International Conference on Nanostructures (ICNS5), 6-9 March 2014, Kish Island, Iran.
• M. Ahmadi, A. Shojaei, Correlation between stress-softening behavior and mechanical performance of NR/SBR composites reinforced with carbon blacks and MWNT, 15th European Conference on Composite Materials (ECCM-15), 24-28 June 2012, Venice, Italy.
• P. Jahanmard, A. Shojaei, M. Faghihi, Experimental and theoretical study on the mechanical properties of novolac phenolic resin nanocomposites: effects of nanoclay and multiwalled carbon nanotube, 15th European Conference on Composite Materials (ECCM-15), 24-28 June 2012, Venice, Italy.
• P. Jahanmard, A. Shojaei, Correlation of morphology and mechanical properties of novolac phenolic resin/clay nanocomposites prepared via solution mixing method, Polymer Processing Society (PPS2011)/Asia-Australia Regional Meeting, November 15-17, 2011, Kish Island, Iran.
• M. Karimi, A. Nematollahzadeh, A. Shojaei, M. J. Abdekhodaie, Synthesis of polymeric beads with tunable size and porosity and their application in removal of Cr(VI), Polymer Processing Society (PPS2011)/Asia-Australia Regional Meeting, November 15-17, 2011, Kish Island, Iran.
• M. Ahmadi, A. Shojaei, Investigation of thermal transition and mechanical properties of NR/SBR composites filled with carbon blacks and MWCNT, Polymer Processing Society (PPS2011)/Asia-Australia Regional Meeting, November 15-17, 2011, Kish Island, Iran.
• M. Hadizadeh, A. Shojaei, R. Bagheri, Rhelogical and morphological properties of nanocomposites based on PA66/PA6/MWCNT prepared by melt mixing, 18th International Conference on Composite Materials (ICCM-18) August 21-26, 2011, Jeju island, South Korea.
• M. M. Saatchi, A. Shojaei, Micromechanical modeling to analyze the reinforcing efficiency of carbon nanotube and high structure carbon black on the mechanical properties of styrene-butadiene-rubber, The 2nd International Conference on Composites: Characterization Fabrication and Application (CCFA-2) Dec. 27-30, 2010, Kish Island, Iran.
• M. Bandarian, A. Shojaei, A.M. Rashidi, The effect of functionality of multi wall carbon nanotube on the thermal properties of polyurethane, 14th European Conference on Composite Materials (ECCM-14), 7-10 June 2010, Budapest University of Technology and Economics, Budapest, Hungary. Book of Abstract, Page 34.
• P. Eghbal, A. Shojaei, S. M. R. Pishvaie, Rapid 3-dimensional simulation of curing in thick parts of fiber reinforced composites using dynamic artificial neural networks, 9th International Seminar on Polymer Science and Technology(ISPST-2009), 17-21 October 2009, Tehran, Iran.
• A. Behradfar, A. Shojaei, N. Sheikh, Correlation of morphological and rheological characteristics of low density polyethylene/ethylene-vinyl acetate/organoclay ternary nanocomposites, 9th International Seminar on Polymer Science and Technology(ISPST-2009), 17-21 October 2009, Tehran, Iran
• S. Gholamalipour, A. Shojaei, Effect of chemical modification of PTFE particles on the physical and mechanical properties of PA66/PTFE composites, ETDCM9- 9th Seminar on Experimental Techniques and Design in Composite Materials, PP 67-68, 30 September-2 October 2009 –DTG University of Padova–Vicenza, Italy.
• M. Faghihi, A. Shojaei, Effect of copper nanoparticle on the properties of styrene butadiene rubber, ETDCM9- 9th Seminar on Experimental Techniques and Design in Composite Materials,PP 133-134, 30 September-2 October 2009 –DTG University of Padova–Vicenza, Italy.
Recent
• P. Rahmani, A. Shojaei, Tushar Sakorikar , Meixiang Wang, Yuniva Mendoza-Apodaca, Michael D. Dickey. Liquid Metal Nanoparticles Physically Hybridized with Cellulose Nanocrystals Initiate and Toughen Hydrogels with Piezoionic Properties, ACS Nano, Accepted (2024).
• P. Rahmani, A. Shojaei, M. Dickey, A highly conductive and ultra-stretchable polyaniline/cellulose nanocrystal/polyacrylamide hydrogel with hydrophobic associations for wearable strain sensors, Journal of Materials Chemistry A, Accepted (2024).
• A. Mohammadi, E. Jafarpour, K. Mirzaei, A. Shojaei, P. Jafarpour, M. Beikmohammadi Eyni, S. Mirzaei, H. Molavi, Novel ZIF-8/CNC Nanohybrid with an Interconnected Structure: Toward a Sustainable Adsorbent for Efficient Removal of Cd(II) Ions, ACS Applied Materials & Interfaces, https://doi.org/10.1021/acsami.3c15524 (2024).
• A. Dabaleh, A. Mohammadi, A. Shojaei, A. Nematollahzadeh, Eco-Friendly Fumed Nanosilica@Nanodiamond Hybrid Nanoparticles with Dual Sustainable Self-Healing and Barrier Anticorrosive Performances in Epoxy Coating, ACS Applied Materials & Interfaces, doi.org/10.1021/acsami.3c15220 (2024).
• M. Samieifakhr, A. Shojaei, Improved crystallization behavior and enhanced impact strength of melt processed poly(ethylene terephthalate)/UiO-66 nanocomposites, Polymer, Vol. 290, 126593 (2024).
• S. Salkhi Khasraghi, A. Shojaei, M. Momenilandi, Enhancing tire tread performance with combined nano and micro-silica particles in styrene butadiene rubber/butadiene rubber compound, Journal of Elastomers & Plastics, Vol. 55, 1213 (2023).
• A. Dabaleh, A. Shojaei, A. Nematollahzadeh, H. Molavi, Development of pH-sensitive UiO-66/polyaniline nanohybrids with self-healing anticorrosive performance in epoxy coatings, Industrial & Engineering Chemistry Research, DOI.org/10.1021/acs.iecr.3c00056 (2023).
• K. Khederlou, M. Eslamian, A. Shojaei, R. Bagheri, Y. Tamsilian, Crystal and morphology development in immiscible nonpolar polymer blend nanocomposite based on low-density polyethylene and linear low-density polyethylene in presence of clay and compatibilizer, Journal of Vinyl & Additive Technology, Online published (DOI:10.1002/vnl.21997), (2023).
• K. Mirzaeia, E. Jafarpoura, A. Shojaei, S. Salkhi Khasraghia, P. Jafarpour, An investigation on the influence of highly acidic media on the microstructural stability and dye adsorption performance of UiO-66, Applied Surface Science, Vol. 618, 156531 (2023).
• F. Ahmadijokani, H. Molavi, S. Ahmadipouya, M. Rezakazemi, A. Ghaffarkhah, M. Kamkar, A. Shojaei, M. Arjmand, Polyurethane-based membranes for CO2 separation: A comprehensive review, Progress in Energy and Combustion Science, Vol. 97, 101095 (2023).
• B. Abdi, A. Shojaei, H. Molavi, Superior Fatigue and Mechanical Properties of Ethylene-Propylene Diene Monomer Rubber Incorporated With Zr-based Metal-Organic Framework, Journal of Polymer Research, In press (2023)
• S. Tajahmadi, H. Molavi, F. Ahmadijokani, A. Shamloo, A. Shojaei, M. Sharifzadeh, M. Rezakazemi, A. Fatehizadeh, T. M. Aminabhavi, M. Arjmand, Metal-organic frameworks: A promising option for the diagnosis and treatment of Alzheimer’s disease, Journal of Controlled Release, Vol. 353, 1 (2023).
• S. Tajahmadi, A. Shamloo, A. Shojaei, M. Sharifzadeh, Adsorption Behavior of a Gd-Based Metal–Organic Framework toward the Quercetin Drug: Effect of the Activation Condition, ACS Omega, Vol. 7, 41177 (2022).
• A. Mohammadi, A. Shojaei, S. Salkhi Khasraghi, Improvement of nanosilica effects on the performance of mechanically processed styrene-butadiene rubber by rational hybridization with nanodiamond, Diamond and Related Materials, Vol. 130, 109487 (2022).
• K. Mirzaei, A. Mohammadi, E. Jafarpour, A. Shojaei, A. Lotfollahzade Moghaddam, Improved adsorption performance of ZIF-8 towards methylene blue dye by hybridization with nanodiamond, Journal of Water Process Engineering, Vol. 50, 103254 (2022).
• F. Ahmadijokani, H. Molavi, A. Peyghambari, A. Shojaei, M. Rezakazami, Efficient removal of heavy metal ions from aqueous media by unmodified and modified nanodiamonds, Journal of Environmental Management, Vol. 316, 115214 (2022).
• K. Mirzaei, E. Jafarpour, A. Shojaei, H. Molavi, Facile Synthesis of Polyaniline@ UiO-66 Nanohybrids for Efficient and Rapid Adsorption of Methyl Orange from Aqueous Media, Industrial & Engineering Chemistry Research, Vol. 61 (32), 11735-11746 (2022).
• P. Amin, A. Shojaei, T. Hamzehlouyan, ZIF-8/Chitosan hybrid nanoparticles with tunable morphologies as superior adsorbents towards both anionic and cationic dyes for a broad range of acidic and basic environments, Microporous and Mesoporous Materials, Vol. 343, 112149 (2022).
• A Mohammadi, A Shojaei, SS Khasraghi, AK Ghavidel, Synthesis of high-reinforcing-silica@nanodiamond nanohybrids as efficient particles for enhancement of mechanical, thermal, and rolling resistance of styrene-butadiene rubber, Polymer, Vol. 155, 125037 (2022).
• P. Rahmani, A. Shojaei, Developing tough terpolymer hydrogel with outstanding swelling ability by hydrophobic association cross-linking, Polymer, Vol. 255, 125037 (2022).
• S. Salkhi Khasraghi, M. Momenilandi, A. Shojaei, Tire tread performance of silica-filled SBR/BR rubber composites incorporated with nanodiamond and nanodiamond/nano-SiO2 hybrid nanoparticle, Diamond and Related Materials, Vol. 126, , 109068 (2022).
• K. Khederlou, R. Bagheri, A. Shojaei, N. Gontard, Y. Tamsilian, Improved adsorption performance of ZIF-8 towards methylene blue dye by hybridization with nanodiamond, ACS Omega, In press (2022).
• P. Rahmani, A. Shojaei, M. Dickey, A highly conductive and ultra-stretchable polyaniline/cellulose nanocrystal/polyacrylamide hydrogel with hydrophobic associations for wearable strain sensors, Journal of Materials Chemistry A, Accepted (2024).
• A. Mohammadi, E. Jafarpour, K. Mirzaei, A. Shojaei, P. Jafarpour, M. Beikmohammadi Eyni, S. Mirzaei, H. Molavi, Novel ZIF-8/CNC Nanohybrid with an Interconnected Structure: Toward a Sustainable Adsorbent for Efficient Removal of Cd(II) Ions, ACS Applied Materials & Interfaces, https://doi.org/10.1021/acsami.3c15524 (2024).
• A. Dabaleh, A. Mohammadi, A. Shojaei, A. Nematollahzadeh, Eco-Friendly Fumed Nanosilica@Nanodiamond Hybrid Nanoparticles with Dual Sustainable Self-Healing and Barrier Anticorrosive Performances in Epoxy Coating, ACS Applied Materials & Interfaces, doi.org/10.1021/acsami.3c15220 (2024).
• M. Samieifakhr, A. Shojaei, Improved crystallization behavior and enhanced impact strength of melt processed poly(ethylene terephthalate)/UiO-66 nanocomposites, Polymer, Vol. 290, 126593 (2024).
• S. Salkhi Khasraghi, A. Shojaei, M. Momenilandi, Enhancing tire tread performance with combined nano and micro-silica particles in styrene butadiene rubber/butadiene rubber compound, Journal of Elastomers & Plastics, Vol. 55, 1213 (2023).
• A. Dabaleh, A. Shojaei, A. Nematollahzadeh, H. Molavi, Development of pH-sensitive UiO-66/polyaniline nanohybrids with self-healing anticorrosive performance in epoxy coatings, Industrial & Engineering Chemistry Research, DOI.org/10.1021/acs.iecr.3c00056 (2023).
• K. Khederlou, M. Eslamian, A. Shojaei, R. Bagheri, Y. Tamsilian, Crystal and morphology development in immiscible nonpolar polymer blend nanocomposite based on low-density polyethylene and linear low-density polyethylene in presence of clay and compatibilizer, Journal of Vinyl & Additive Technology, Online published (DOI:10.1002/vnl.21997), (2023).
• K. Mirzaeia, E. Jafarpoura, A. Shojaei, S. Salkhi Khasraghia, P. Jafarpour, An investigation on the influence of highly acidic media on the microstructural stability and dye adsorption performance of UiO-66, Applied Surface Science, Vol. 618, 156531 (2023).
• F. Ahmadijokani, H. Molavi, S. Ahmadipouya, M. Rezakazemi, A. Ghaffarkhah, M. Kamkar, A. Shojaei, M. Arjmand, Polyurethane-based membranes for CO2 separation: A comprehensive review, Progress in Energy and Combustion Science, Vol. 97, 101095 (2023).
• B. Abdi, A. Shojaei, H. Molavi, Superior Fatigue and Mechanical Properties of Ethylene-Propylene Diene Monomer Rubber Incorporated With Zr-based Metal-Organic Framework, Journal of Polymer Research, In press (2023)
• S. Tajahmadi, H. Molavi, F. Ahmadijokani, A. Shamloo, A. Shojaei, M. Sharifzadeh, M. Rezakazemi, A. Fatehizadeh, T. M. Aminabhavi, M. Arjmand, Metal-organic frameworks: A promising option for the diagnosis and treatment of Alzheimer’s disease, Journal of Controlled Release, Vol. 353, 1 (2023).
• S. Tajahmadi, A. Shamloo, A. Shojaei, M. Sharifzadeh, Adsorption Behavior of a Gd-Based Metal–Organic Framework toward the Quercetin Drug: Effect of the Activation Condition, ACS Omega, Vol. 7, 41177 (2022).
• A. Mohammadi, A. Shojaei, S. Salkhi Khasraghi, Improvement of nanosilica effects on the performance of mechanically processed styrene-butadiene rubber by rational hybridization with nanodiamond, Diamond and Related Materials, Vol. 130, 109487 (2022).
• K. Mirzaei, A. Mohammadi, E. Jafarpour, A. Shojaei, A. Lotfollahzade Moghaddam, Improved adsorption performance of ZIF-8 towards methylene blue dye by hybridization with nanodiamond, Journal of Water Process Engineering, Vol. 50, 103254 (2022).
• F. Ahmadijokani, H. Molavi, A. Peyghambari, A. Shojaei, M. Rezakazami, Efficient removal of heavy metal ions from aqueous media by unmodified and modified nanodiamonds, Journal of Environmental Management, Vol. 316, 115214 (2022).
• K. Mirzaei, E. Jafarpour, A. Shojaei, H. Molavi, Facile Synthesis of Polyaniline@ UiO-66 Nanohybrids for Efficient and Rapid Adsorption of Methyl Orange from Aqueous Media, Industrial & Engineering Chemistry Research, Vol. 61 (32), 11735-11746 (2022).
• P. Amin, A. Shojaei, T. Hamzehlouyan, ZIF-8/Chitosan hybrid nanoparticles with tunable morphologies as superior adsorbents towards both anionic and cationic dyes for a broad range of acidic and basic environments, Microporous and Mesoporous Materials, Vol. 343, 112149 (2022).
• A Mohammadi, A Shojaei, SS Khasraghi, AK Ghavidel, Synthesis of high-reinforcing-silica@nanodiamond nanohybrids as efficient particles for enhancement of mechanical, thermal, and rolling resistance of styrene-butadiene rubber, Polymer, Vol. 155, 125037 (2022).
• P. Rahmani, A. Shojaei, Developing tough terpolymer hydrogel with outstanding swelling ability by hydrophobic association cross-linking, Polymer, Vol. 255, 125037 (2022).
• S. Salkhi Khasraghi, M. Momenilandi, A. Shojaei, Tire tread performance of silica-filled SBR/BR rubber composites incorporated with nanodiamond and nanodiamond/nano-SiO2 hybrid nanoparticle, Diamond and Related Materials, Vol. 126, , 109068 (2022).
• K. Khederlou, R. Bagheri, A. Shojaei, N. Gontard, Y. Tamsilian, Improved adsorption performance of ZIF-8 towards methylene blue dye by hybridization with nanodiamond, ACS Omega, In press (2022).