sharif Logo  

Department of Chemical & Petroleum Engineering

 Home |  Research Interests |  Experiences |  Publications |  Courses |

Picture

   
 

Contact Information

 

 

Professor

Department of Chemical & Petroleum Engineering,

Azadi Ave., Tehran, Iran

B.O.Box:11365-9465

 

Tel: +(98) (21) 6616 5425

Fax: +(98) (21) 6601 2983

Email: kazemini@sharif.edu

 

         
       
 

Books:

Three books are translated from English to Farsi:

1. "Kinetics of Heterogeneous Catalytic Reactions," of Boudart, translated to Farsi for the

Markaz-e-Nashr Publisher affiliated to the Iranian Academy of Sciences, 2001.

 

2. "Chemical Engineering Handbook," of Chopie and Hicks, translated to Farsi for the

Markaz-e-Nashr Publisher affiliated to the Iranian Acadamy of Science. 2004.

 

3. " Elements of Chemical Reaction Engineering," of Fogler (the 1 st 6 Chapters),

translated to Farsi for the University Book Center Publishers, 2006.

 

 

Papers published in refereed Journals in the past ten years:

1. "CFD Modeling of Gas-Liquid Hydrodynamics in a Stirred Tank Reactor," Iran Journal

of Chemistry and Chemical Engineering, In Press, 2007.

 

2. "Mathematical Modeling of a Fixed Bed Chromatography Reactor for Fisher Tropsch

Synthesis,"Iranian Journal of Chemical Engineering, In Press, 2007.

 

3. "Kinetic Investigation of NDMA to UDMH Hydrogenation on a Pd/C Catalyst," Iranian

Journal of Science and Technology, Transaction B, Vol.30, No.B5, 2006.

 

4. " A Simulated Counter-current Moving Bed Reactor for Oxidation of CO at Low

Concentration over Pt/A12O3," Studies in Surface Science and Catalysis, Vol.159,

H. K.Rhee, L. S. Nam and J. M. Park; Editors, Elsevier Publications, 2006.

 

5. " Evaluation of Zeolites in Production of Tetrahydrofuran from 1, 4-Butanediaol;

Performance Tests and Kinetic Investigations," Journal of Industrial and Engineering

Chemistry Research, In Press, 2006.

 

6. "Reactor Modeling of a Non-Catalytic OCM Process," Iranian Journal of Chemical

Engineering, Vol. 2, No. 2, 2005.

 

7. " Preparation and Evaluation of Sulfanation Process Catalyst," Sharif Quarterly

Scientific and Research Review, No. 28, 2004.

 

8. "Development of an Empirical Model for Catalyst Lifetime in Isobutane/Butene

Alkylation," Journal of Industrial and Engineering Chemistry Research, No.42, pp

. 3886-3892, 2003.

 

9. " Transient Modeling of Dual Fuel Catalytic Converter," Iranian Journal of Science

and Technology, Transaction B, Vol. 27, No. B2, 2003.

 

10. " Development of a Power-Law Expression for Catalyst Deactivation in Liquid-Phase

Isobutane Alkylation," Scientia Iranica, Vol. 10, No. 3, pp. 334-340, 2003.

 

11. "Treatment of Diatomaceous Earth to Obtain its Catalyst Support," Scientia Iranica,

Vol. 10, No. 3, pp. 350-356, 2003.

 

12. "Equilibrium Isotherms for Co, CO2, CH4 and C2H4 on the 5A Molecular Sieve by a

Simple Volumetric Apparatus," Journal of Separation and Purification Technologies,

No. 28, pp. 53-56, 2002.

 

13. "Modeling of the Effect of Operational Parameters and Concentration of some

Corrosion Inhibitors on the Corrosion of Mild Steel," Journal of Anti-Corrosion Methods

and Materials, Vol. 49, No. 6, 2002.

 

14. "Deactivation Behavior of the Catalyst in Solid Acid Catalyzed Alkylation: Effect of

Pore Mouth Plugging," Chemical Engineering Science, 57, 3611-20, 2002.

 

15. "Effect of Phosphonate Based Corrosion Inhibitors in a Cooling Water System,"

British Corrosion Journal, Vol. 37, No. 3, 2002.

 

16. "An Experimentally Determined Configuration for Simulated Moving Beds as a

Separating Reactor in Gas Phase, " Iranica Scientia, 9, 7, 2002.

 

17. " Design of a Solid Polymer Electrolyte Fuel Cell Stack of 1KW," Sharif Quarterly

Scientific and Research Review, No. 24, 2002.

 

18. "Catalytic Converter Reducing Dual Fuel Engine Emission," Journal of Iranica

Scientia, 7, 2, 2002.

 

19. "Preparation and Evaluation of Reforming Catalyst of Ni-Alumina Type," Iran Journal

of Chemistry and Chemical Engineering, Vol. 18, No.1 and 2, 2000.

 

20. "A New Immobilized Alkali H2/O2 Fuel Cell," Journal of Power Sources, 88, 262-8, 2000.

 

21. "Simultaneous Catalytic Reaction and Separation by SPA Process in a Simulated

Moving Bed," Journal of Petroleum and Coal, 42, 3-4, 2000.

 

22. "Mass Balance and Water Management for H2-Air Fuel Cell of the Alkaline Matrix

Type," International Journal of Hydrogen Energy, 23, 6, 1998.

 

23. "Mechanism Discrimination in Heterogeneous Reaction," Industrial and Engineering

Chemistry Research, 37, 362-6, 1998.

 

24. "The Stability Analysis Modeling of pH and Ionic Strength Inactivation of Penicillin-G

Acylase Obtained from Various Species of Escherichia E-Coli," Biochemical Engineering

Journal, 2, 81-8, 1998.

 

 

 

Papers published in proceeding of National and International Conferences:

1. "A two dimensional transiet CFD model of hydrodynamics and mass transfer in a

bubble column reactor", 5th International conference on Unsteady-state Processes in

Catalysis, USPC-5, Osaka, Japan, 2006.

 

2. "Investigating effects of different preparation parameters on precipitating-aging step

toward determining an optimum Ni-hydrogenation catalyst with different promoters",

17th International congress of Chemical and Process Engineering, CHISA2006, Prauge,

Czech Republic, 2006.

 

3. "A three dimensional CFD modeling of hydrodynamics and mass transfer in a gas-liquid

impeller stirred tank reactor", 17th International congress of Chemical and Process

Engineering, CHISA2006, Prauge, Czech Republic, 2006.

 

4. "An experimental kinetic optimization of NDMA hydrogenation to UDMH and DMA

on a Pd/C catalyst", 17th International congress of Chemical and Process Engineering,

CHISA2006, Prauge, Czech Republic, 2006.

 

5. "An optimum catalyst for dehydration of 1, 4-butanediol in production of

tetrahydrofuran", 17th International congress of Chemical and Process Engineering,

CHISA2006, Prauge, Czech Republic, 2006.

 

6. "Reactor modeling of direct conversion of methane to methanol in a catalytic

fluidized bed", 17th International congress of Chemical and Process Engineering,

CHISA2006, Prauge, Czech Republic, 2006.

 

7. "Preparation and Physicochemical Investigation of Ethylene Oxide Production Catalyst"

,11th Iranian National chemical Engineering Congress, Tehran, Iran, 2006.

 

8. "Investigation of power law equation performance to prediction of the Butene/Isobutene

Alkylation Catalyst deactivation.", 11th Iranian National chemical Engineering Congress,

Tehran, Iran, 2006.

 

9. "Reactor modeling of Direct Conversion of Methane to methanol in a Catalytic Fluidized

Bed reactor", 11th Iranian National chemical Engineering Congress, Tehran, Iran, 2006.

 

10. "Optimization of Production Time of Penicillin from Glucose and submerged Corn Extract"

, 11th Iranian National chemical Engineering Congress, Tehran, Iran, 2006.

 

11. "Experimental Study of The Influence of Al,Mg and Zn Promoters on Activity and

Selectivity of Ni/Keiselghur on Vegtable Oil Hydrogenation", 11th Iranian National

chemical EngineeringCongress, Tehran, Iran, 2006.

 

12. "Preparation and Investigation of The optimum Ni/Keiselghur catalyst for Hydrogenation

of Edible Oil", 11th Iranian National chemical Engineering Congress, Tehran, Iran, 2006.

 

13. "Modeling for kinetic of degradation of aflatoxin B, in pistachio by radiation and humidity",

16th International congress of Chemical and Process Engineering, CHISA2004, Prauge,

Czech Republic, 2004.

 

14. "A mathematical model for deactivation of methanol synthesis catalyst by sintering" ,

16th International congress of Chemical and Process Engineering, CHISA2004, Prauge,

Czech Republic, 2004.

 

15. "Investigation of Octane Number improvement because of Aromatic production

Increasing in Catalytic Reforming process", 9th Iranian National chemical Engineering

Congress, Tehran, Iran, 2004.

 

16. "Preparation and Kinetic Investigation of V2O5 Catalyst in sulfur Acid production process"

, 9th Iranian National chemical Engineering Congress, Tehran, Iran, 2004.

 

17. "Solid alkylation catalyst and the green gasoline", World Petroleum Congress 2nd

Regional Meeting, Doha, Qatar, 2003.

 

18. "A mathematical model to determine the Dynamic profiles of Solid-Liquid mass transfer

coefficient in a Trickle flow and Fixed-Bed reactor", 53th Canadian Chemical Engineering

Conference, 6th Conference on Process Integration, Modelling and Optimization for Energy

Saving and Pollution Reduction, CSChE2003,Alberta, Canada,2003.

 

19. " The effect of acid site concentration on the catalyst lifetime in solid acid catalyzed

alkylation",4th European Congress of chemical Engineering, Granada, Spain, 2003.

 

20. "Experimental investigation of Sulfated Zirconia catalyst for Butene/ IsoButane Alkylation",

8th Iranian National chemical Engineering Congress, Mashhad, Iran, 2003.

 

21. "A mathematical model for deactivation of a solid acid catalyst in liquid-phase isobutene

alkylation", 15th International congress of Chemical and Process Engineering, CHISA2002,

Praha, Czech Republic, 2002

 

22. "Solid acid catalytic Alkylation: A means for gasoline-aromatics reduction", 17th World

Petroleum Congress, Rio de Janeiro, Brazil, 2002.

 

23. "Mathematical optimization of production and separation process of partial Oxidation

of Methane to Synthesis gas in membrane reactor", 7th Iranian National chemical

Engineering Congress, Tehran, Iran, 2002.

 

24. "Modeling of the effect of operating parameter and inhibitor concentration on steal

corrosion in Heat exchangers", 7th Iranian National chemical Engineering Congress,

Tehran, Iran, 2002.

 

25. "Presentation of the experimental model to determine the lifetime of the catalyst in

liquid phase Buten/Butane Alkilation in CSTR reactor", 7th Iranian National chemical

Engineering Congress, Tehran, Iran, 2002.

 

26. "Solid Acid Catalytic Alkylation: A Mean for Gasoline-Aromatics Reduction," Accepted

for Presentation in the 17th World Petroleum Congress, Riodejaniro, Brazil, Sept. 2002.

 

27. "Kinetic Modeling of Partial Oxidation of Methane for Production of Syngas," 6th

Iranian National Chemical Engineering Congress, Isfahan, Iran, 2001.

 

28. "Investigation of Sonochemical Pyrolysis of Hydrocarbons in Ultrasonic Reactors,"

6th Iranian National Chemical Engineering Congress, Isfahan, Iran, 2001.

 

29. "Kinetic and Reactor Modeling of the OCM Process," 6th Iranian National Chemical

Engineering Congress, Isfahan, Iran, 2001.

 

30. "Design of a lKW Solid Polymer Electrolyte Fuel Cell Stack," 1st Iranian National Fuel

Cell Symposium, Tehran, Iran, 2001.

 

31. "Adsorption Equilibrium Data for CO, C02, CH4 and C2H4 on SA Molecular Sieve,"

International Conference on Particle Technology Organized by the European Federation

of Chemical Engineers, Budapest, Hungry, 2001.

 

32. "A New Configuration for Simulated Moving Beds as a Reactive ¬Separator," 2nd

International Symposium on Oil, Gas and Petrochemical Materials, Tehran, Iran, 2000.

 

33. “ Development of a 1kW Fuel cell Stack”, 14th International congress of Chemical

and Process Engineering, CHISA2000, Praha, Czech Republic, 2000.

 

34. "Simulated Moving Beds: A Novel Method for Simultaneous Separation and Reaction

in Gas Phase," International Conference on Chemical Engineering, Environmental Protection

and Bioengineering Organized by DCHEMA, Frankfourt, Germany, 2000.

 

35. "Treatment of Waste Water of the Arak Petrochemical Complex Through Electrochemical

Means," 4th International Iranian Congress in Chemical Engineering, Shiraz, Iran, 2000.

 

36. "Determining of Optimized Operating Parameters For Dissociation of Organic Solvents

in an Ultrasonic Reactor," 4th International Iranian Congress in Chemical Engineering,

Shiraz, Iran, 2000.

 

37. "Optimized Regeneration Condition for Used Catalysts of a Sulfuric Acid Production Plant,"

4th International Iranian Congress in Chemical Engineering, Shiraz, Iran, 2000.

 

38. ”A Design Algorithm For Stack Preparation of an SPE Fuel Cell," 4th International

Iranian Congress in Chemical Engineering, Shiraz, Iran, 2000.

 

39. "A Transient Model for Catalytic Converters Utilizing Dual Fuel of Natural Gas / Gas Oil,"

4th International Iranian Congress in Chemical Engineering, Shiraz, Iran, 2000.

 

40. "Presenting a Numerical Method for Solving Electrochemical Systems Mathematical Models,"

4th International Iranian Congress in Chemical Engineering, Shiraz, Iran, 2000.

 

41. "A Transient Model for the Performance of Dual Fuel Catalytic Converter," 14th Chemical

and Process Engineering Congress, CHISA2000, Prauge, Czech Republic, 2000.

 

42. "Development of 1 KW Fuel Cell Stack," 14th Chemical and Process Engineering Congress,

CHISA2000, Prauge, Czech Republic, 2000.

 

43. "Application of Gas Diffusion Electrodes in Alkaline Fuel Cells: An Experimental and

Theoretical Study," 4th Iranian National Chemical Engineering Congress, Tehran, Iran, 1998.

 

44. "Investigation of the Deactivation Phenomena in Alkaline Fuel Cell Electrodes," 4th

Iranian National Chemical Engineering Congress, Tehran, Iran, 1998.

 

45. "A New Pattern for Simulated Moving Bed Process as a Reactor¬ Separator," 4th

Iranian National Chemical Engineering Congress, Tehran, Iran, 1998.

 

46. "Kinetic Investigation of Methane Oxidation in Dual Fuel Catalytic Converter," 4th

Iranian National Chemical Engineering Congress, Tehran, Iran, 1998.

 

47. "Two Dimensional Catalytic Reactor Modeling for Conversion of S02 to S03," 4th

Iranian National Chemical Engineering Congress, Tehran, Iran, 1998.

 

48. "Experimental Optimization of Parameters Affecting Ethylene-Ethane Selectivity in

FT - Synthesis," 12th Chemical and Process Engineering Congress, CHISA98, Prauge,

Czech Republic, 1998.

 

49. "Catalytic Converter Performance in Dual Fuel Engines," 12th Chemical and Process

Engineering Congress, CHISA98, Prauge, Czech Republic, 1998.

 

50. "The Kinetics of pH Deactivation of Penicillin - G Acylase Obtained from E-Coli," 12th

Chemical and Process Engineering Congress, CHISA98, Prauge, Czech Republic, 1998.

 

51. "Fuel Cells as a Mean of Producing Clean Energy from Fossil Fuel: An Experimental

Approach," 2nd International Congress on Non¬Renewable Energy Sources, Tehran, Iran,

1998.

 

52. "Catalytic Converter Performance Using Natural Gas / Gas Oil in Dual Fuel Engines,"

2nd International Congress on Non-Renewable Energy Sources, Tehran, Iran, 1998.

 

53. "Developing of a Mathematical Model of Random Pore Network for Investigation of

Pore Effect on Reaction - Diffusion Phenomena in Solid Catalysts," 4th Iranian National

Chemical Engineering Congress, Tehran, Iran, 1998.

 

54. "Diffusion, Adsorption and Reaction on a Porous Fractal Catalyst," 2nd Iranian

National Surface Engineering Seminar, Tehran, Iran, 1997.

 

55. "Design and Construction of a Fuel Cell," 3rd Iranian National Chemical Engineering

Congress, Ahwaz, Iran, 1997.

 

56. "Experimental Investigation of Effects of Different Parameters on Production of

Ethylene and Ethane from Syngas in the Catalytic FT Reaction," 3rd Iranian National

Chemical Engineering Congress, Ahwaz, Iran, 1997.

 

57. "Performance of Catalytic Converter in Dual Diesel Fuel Engines," 3rd Iranian

National Chemical Engineering Congress, Ahwaz, Iran, 1997.

 

58. "Design and Construction of an Equipment for Determining the Exact Equilibrium

Gas / Solid Concentration through a Volumetric Method," 8th Gas, Oil and Petrochemical

Conference, Tehran, Iran, 1997.

 

59. "Reaction on Fractal Surfaces," 2nd Iranian National Chemical Engineering Congress,

Tehran, Iran, 1996.

 

60. "Mathematical Model for Reduction in Activation of Catalysts in Heavy Oil Processes,"

2nd Iranian National Chemical Engineering Congress, Tehran, Iran, 1996.

 

61. "Fuel Cells as an Alternative mean of Producing Electricity in Iran," 2nd International

Conference in Solar Energy in Islamic Countries, Tehran, Iran, 1996.

 

62. "Design and Modeling of Solid Oxide Fuel Cells: An Electrochemical Study," 2nd

International Conference in Solar Energy in Islamic Countries, Tehran, Iran, 1996.

 

63. "Kinetics of Porous Electrodes for Fuel Cells," 2nd International Conference in Solar

Energy in Islamic Countries, Tehran, Iran, 1996.

 

64. "Mathematical Modeling of Water Balance in a Alkaline Fuel Cell," 2nd Iranian

National Chemical Engineering Congress, Tehran, Iran, 1996.

 

65. "Optimization of Catalyst Sizes Used in Hydrocarbons Processing," 7th Gas, Oil

and Petrochemical Conference, Tehran, Iran, 1996.

 

66. "Modeling of Catalyst Deactivation in Catalytic Processes of Heavy Oil and Residues,"

11th Chemical and Process Engineering Congress, CHISA96, Prauge, Czech Republic, 1996.

 

67. "Mathematical Modeling of an Engineered Surface Applied to Bimetallic Catalys

t Preparation," 5th World Congress on Heat Treatment and Surface Engineering, Isfahan,

Iran, 1995.

 

68. "Fractal Analysis in Heterogeneous Catalysis: An Approach for Mechanism Description,"

5th World Congress on Heat Treatment and Surface Engineering, Isfahan, Iran, 1995.

 

69. "Preparation of Single Metallic Reforming Catalyst: A Complementary Experimental and

Theoretical Study," 1st Iranian National Chemical Engineering Congress, Tehran, Iran, 1994.

 

70. "A Microscopic / Macroscopic Study of Reforming Catalyst Preparation through Wet

Impregnation Technique," 1 st International Symposium on Oil, Gas and Petrochemical

Materials, Tehran, Iran, 1994.

 

 

         
 

Copyright 2007,

Latest update January 2007